The wire turns

The business philosophy of Weaving Giaquinto can not be found in the choice of raw materials and their processing.

The yarns used to weave all creations are Perlè Egyptian Cotton and Linen yarn dyed in dantrene. This is the top in terms of non-toxic and resistance to discoloration, as natural fibers.

So, touch the products are Giaquinto velvety and besides being very resistant, the colors of the yarns make them bright and shimmering sight. The fabrics are made with the Jacquard technique, after the inventor who built the machine with which it was possible to create ornate designs on fabrics, weaving the threads warp and weft, moved and motivated by a sequence dictated by a perforated cardboard, as if it were a data read, which is decoded, in fact, the Jacquard machine.
Following processing requires at least seven phases.

  • warper warp preparation
  • The mounting on the frame of the warp, said armature. The loading of the beam, (roller on which is wound the yarn), rear. The passage of the warp threads in the meshes of the heddles, (element of the frame which serves to raise and lower the warp threads alternating). The transition into the slots of the pin of the beam, and finally tying the beam front.
  • The opening of the pass.
  • The weft insertion, (weaving), with the shuttle, (organ that contains the spool, ie the coil of wire);
  • typing with the pin of the beam, to shrink the fabric, bringing the wires
  • unrolling and rolling up the warp of the fabric;
  • removal of the patch, once the warp.

Into The 'warp is the set of threads with the weft combine to form a fabric.
The warp threads are stretched on the frame, connected to the back beam are made to pass through the meshes of the healds and the slots of the comb to be related to the beam front, are those (if I look at a work of weaving) vertical, parallel to the selvages.
Opening creates a gap called step that allows you to pass the shuttle with the weft thread.
The plot is the set of threads with the warp combine to form a fabric.
If you look at a work of weaving loom on the weft threads are those arranged horizontally, ranging from a selvedge to another.
The plot is inserted into the warp step from a shuttle or spool, which passing from one side of the frame, unroll the yarn is beaten by the comb closer to the weft of the previous line, so one line after the other is a woven fabric.